Parts Of A Power Transmission Line And Transmission Tower|Transmission Tower Parts

Contents

Transmission tower parts

Reference Notes

1 Transmission and distribution Quiz

2 Power measurement in a transmission line

3Parts of a Power transmission line and Transmission tower|Transmission tower parts

4 [Latest]Sub Engineer Electrical KSEB Detailed Syllabus Download PDF| KSEB Sub Engineer Syllabus

5 Conductor Materials- Electrical conductor materials

6 Gate Preparation- Power Systems

7 General layout of Steam Power Station

Transmission line parts

1. Insulator.

2. Bundle of two conductors (some lines have 4).

3.Spacer to hold the two conductors apart.

4. Earth wire at top of tower or pylon.

5. The three bundles on one side of the tower make up one electrical circuit. Most lines have two circuits, one each side.

6.Identity plate saying which line it is and who owns it. Also usually has a safety warning notice about the dangers of electrocution.

7.Anti-climbing device – barbed wire to stop unauthorised climbing

Transmission tower Parts

A power transmission tower consists of the following parts,.

1) Peak of transmission tower

2) Cross arm of transmission tower

3) Boom of transmission tower

4) Cage of transmission tower

5) Transmission Tower Body

6) Leg of transmission tower

7) Stub/Anchor Bolt and Base plate assembly of transmission tower.

Electrical power cable

Types of Transmission Tower

There are different types of transmission towers. the detailed post on types of transmission power can be read HERE

Types of Transmission Towers|Electrical Tower Types

The transmission line goes as per available corridors. When there is an unavailability of the shortest distance straight corridor, the transmission line has to deviate from its straight way when obstruction comes. In the total length of a long transmission line, there may be several deviation points.

According to the angle of deviation, there are four types of transmission towers